The ST100R is the latest model from the world renowned Stenner range of Classical Resaws which have long provided a major contribution to secondary processing in the timber and joinery industries.
The ST100R represents another advance in technology and build quality whilst continuing the Stenner tradition of providing a high capacity machine of compact dimensions which will meet a broad range of sawing requirements.
The ST100R is a ‘pitless’ resaw requiring no special installation other than the requirement for mains electricity, air supply and extraction.
The machine now incorporates a full width cast iron table with infeed and outfeed idle rollers, a heavy duty multi roller fence with digital readout, replaceable pressure saw guides to ensure accuracy, pneumatic saw straining, a re-sited HMI control unit for easier visibility, infinitely variable feed rates 5-60 metres/min and of course the traditional 915mm diameter cast iron pulley wheels which have been such a hallmark of Stenner Resaws over the years.
To further increase productivity included as standard equipment on this latest model is a pneumatically operated radial arm feed which is activated by photocell. The standard machine incorporates a hand wheel for fine adjustment and a foot pedal override facility is also available as an option.
This Resaw incorporates a 20HP (15kW) main drive motor, and takes sawblades up to 100mm (4”) wide, thereby providing supreme power and performance which
together with the information provided by the HMI control unit, makes this resaw the ultimate in safe and ‘operator friendly’ performance.
Bandsaw pulley diameter
Max 1.0mm (19g)
Min 0.8mm (21g)
Bandsaw blade width
Max 100mm (4”)
Depth of cut
Max 400mm (15.75”)
Max opening: roller fence to saw line
Max opening: feed rollers to saw line
Feeds speeds (infinitely variable)
5 – 60 metres/min (16 – 200ft/min)
15kW (20hp) Option 18kW (25hp)
Working height of table from floor
Cleaner fluid capacity
3 litres (0.66 gallon)
Dust extraction outlet
1 x 150mm + 1 x 100mm (1 x 6” + 1 x 4”)
1600kgs (1.6 ton)
Pressure sawguide system with easily changeable guides requiring no setting or adjustment.
Infinitely variable feed speed 5 – 60m/min.
15kW main motor drive with automatic starter with two emergency stop buttons.
Handwheel setting of the inward position of the feed rollers
Pneumatic movement of the feed rollers activated by photocell
Selector switch to activate/deactivate photocell.
Free running horizontal table rollers at infeed and outfeed
Pneumatic saw straining.
Cleaning system for sawblades and saw pulleys.
Multi-roller fence providing angle cutting facilities up to 35o
Electronic Operator interface with digital readout of fence position
Machine fitted with DC braking, interlocking of guards and other features to comply with the requirements of the CEN Machinery Directive 2006/42 EC.
5kW motor drive in lieu of 15kW.
Remote control position with feed system controls and emergency stop
Rubber covered feed roller
Arris feed roller
Footpedal override to maintain the radial arm in the “out” position.
Independent timber support roller, each
Linear timber measuring unit
Ammeter to measure load on main motor
Pressure spray lubrication system in lieu of manual drip feed system