Machine Information
Features & Specifications
SPECIFICATIONS
Thickness – Material: 0.4” to 5.9”
Width – Material: 0.4” to 9.0”
Min length of workpiece: 7.87”
Net weight:L 7,920 lbs.
Machine dimensions: 118”L x 74”W x 78”H.
MAIN FRAME & MACHINE BED
- 1 Piece – Cast Iron Main Frame. Specially heat tested for maximum stability and minimum vibration
- 78 inch (2 meter) long Adjustable Infeed Table and Fence (each adjustable .4 inch)
- All tables and fence are Hard Chromed
- Full easy open Insulated Enclosure (for sound and safety)
DRIVE INCLUDES
- All Top Rolls are driven through gearboxes (no chains) and cardan shafts (this drive gives you a low maintenance drive)
- 2 Bottom Driven Infeed Rolls in Infeed Table
- Top Rolls and Top Feed Roll Beam w/ motorized Rise and Fall (1 HP)
- All Top Rolls are air tensioned with individual variable pressure controls to each
- Top/Bottom Powered Outfeed Rolls
- 5 HP Mechanical Variable Speed Drive to 20-82 FPM
CUTTERHEAD SPINDLES
- 40 mm Spindle Diameter – 6,000 RPM
- Adjustment of all spindles from front – Easy to operate station
- Top Head with independent vertical adjustment – manual
- Outfeed bed plate is easily shimmed
- SIKO Simple Std Digital Counters included all other Heads
CUTTERHEADS & POSITION – All 6000 RPM
- 1st bottom head supplied with spiral carbide cutterhead – w/notching capability
- 1 Set (of 4) 4 Knife – 20° CA Cutterheads Included, serrated back
HP |
SWING |
||
1st Bottom Head | 7.5 HP | 4.92” to 6.3” | (125 – 160 mm) |
Right Side Head | 7.5 HP | 4.40” to 7.1” | (112 – 180 mm) |
Left Side Head | 10 HP | 4.40” to 7.1” | (112 – 180 mm) |
Top Head | 15 HP | 3.94” to 8” | (100 – 200 mm) |
2nd Bottom Head | 15 HP | 3.94” to 8” | (100 – 200 mm) |
- 2 point – Lubrication at Infeed Table
- Central Lubrication System
- All lube points at front of the machine
- All machines and electrical components meet CE Safety Standards
- Operations Manual, Toolbox (w/tools)
- 75 KVA three phase auto transformer to run machine on 600 volt power is included
Machine Details